| IMC's
edge trim winders are used to spool scrap materials and reduce the bulk
created by conventional vacuum edge trim removal systems. Edge trim strands
from the slitting operation are spooled into neat, manageable packages
to be either discarded or salvaged. These cantilevered, compact winders
are easy to use and accommodate almost any type of material on cores or
flanged spools; coreless winding is also available. 1.
Freestanding edge trim winder operates to 2500 FPM. Features closed
loop tension control with loadcell feedback; adjustable traverse and
pneumatic lay-on roll for spool uniformity. Spool size: 12" W x
18" OD x 3" or 6" cores.
2. Freestanding
1-position edge trim winder operates in torque mode and follows speed
of main machine to 750 FPM. Spool size: 10" W X 10" OD x 3"
core.
3. Freestanding
edge trim winder combines two edge trims on to a single spool at 2000
FPM. Features rolling guides to position and combine strands to common
point for spooling; precise closed loop tension control; spool size
22" W x 18" OD x 3" core.
4. Machine
mounted 2-position edge trim winder. Spool size: 6" W X 12"
OD x 3" core.
5. Modular
2-position edge trim winder. Spool size 10" W x 10" OD x 3"
1D spools.
|
